Deburring          Microfinishing          Belt Grinding          Polishing          Lapping          Buffing          Superfinishing
Home  > Products  > Special Purpose Machines

Model: Rotary Indexing type polishing machine




Product Description:

  For Polishing Of Brass Hardware
  Job Holding With Fixtures
  Cycle Time: 60 seconds with loading /unloading
  Specially Designed MUSH HEAD Type Polishing heads
  Input: 220 grit Belt ground
  Output: Buff Finish

Model: Weldment grinding of earthmover rims




+ View Large

Product Description:

Weldment grinding of earthmover rims

      

Model: Deburring machine for fluted roller.




+ View Large

Product Description:

Deburring machine for fluted roller.

Component: Length 500 TO 1000 MM

Input Output Conditions:
Input: With micro burrs on splines/flutes.
Output: Deburred on splines/flutes and smoothend for easy thread flow.

Prouctivity:
6 pieces per three minutes (30 sec per component)

Advantages:
 Due to six station machine productivity is higher.
 Easy load/unload of jobs.
 Setable parameters with PLC.
 Smooth and consistent deburring.
 Automatic wheel wear compensation ensures consistent quality and increased wire brush life.



Model: Engine valve stem finishing machine.




+ View Large

Product Description:

Engine valve stem finishing machine.

Purpose:  To finish stem of engine valve after grinding & Hard chrome plating.
Input:  Ground finish with 2Rz.
Output:  below 1Rz.
Cycle Time:  15 sec / job.

Advantages:
1. Uniform surface finish.
2. Removes Milky layer of hard chrome.

Special Features:  Machine complete with auto loading and unloading system.



Model: Tolerance grinding machine to generate flatness on aluminium die casting.




+ View Large

Product Description:

Tolerance grinding machine to generate flatness on aluminium die casting.

Application:

To create a reference surface with in 0.05 flatness on aluminium die castings such as engine housings, cylinder housings etc. This reference face is used as location for subsequent milling and other machining operations conventionally this reference face is created by milling process wherein job has to be clampedIn new process of belt grinding simple drop in fixtures are used. Thus clamping time is reduced and also spring back problem is eliminated

Advantages:

  Material removal up to 1.5 mm in less than in 1 min
  Flatness achieved within 0.05 mm
  This process generates random scratch pattern which gives better sealing properties.
  Lower cost of machine.



Model: Semiautomatic machine for polishing of 4 wheeler of wheel rims.




+ View Large

Product Description:

Semiautomatic machine for polishing of 4 wheeler of wheel rims.



Model: LIT-6 - Automatic RIM Polishing Machine



+ View Large

Machine with 3 external & 4 internal heads

Rim Size Adjustment : By motorized geared drive
MOP Wear Compensation : Motorized
Production : Up to 240 rims per hour

      

Model: ZA 16 - Piston rod buffing machine



+ View Large

Piston rod buffing machine

Input : 1.5 Rz
Output : 0.5 Rz
Production : 12 to 20 jobs per minute